HEA pvc privacy panel fence 6'x8'

Deqing Huazhijie Railing & Fencing Co., Ltd. is a China PVC fence manufacturer producing the HEA pvc privacy panel fence 6'x8' at our plant in Deqing, Huzhou, Zhejiang, near Shanghai. We have worked in PVC extrusion since 2003, and every HEA section leaves the factory as a complete kit — extruded, cut, drilled, notched and packed — rather than a bundle of loose profiles. The HEA module is our full-height privacy panel: a 72" × 96" section in 100% virgin PVC with an aluminum-reinforced bottom rail, specified for residential boundaries, villa and estate perimeters, courtyard screening, warehouse yards and light commercial enclosure work.

A Complete Section, Not a Parts List

An HEA order is assembled from three decisions: section, post and gate. The section itself is a fixed bill of materials, so the specification below is what actually arrives on site for each 6' × 8' bay.

Reading the 72" × 96" Module

The 6' × 8' designation describes the assembled bay, not a single moulding. Height is measured to the top of the panel line, and width is the post-to-post spacing that the 94" rails span.

• Height: 72" standard, with other heights available to suit grade changes and screening requirements.
• Width: 96" standard, with alternative widths for runs that must close on a fixed dimension.
• Post height: up to 102" when a taller post is needed for slope, gate hanging or a deeper embedment.
• Rail length: 94" pre-notched top and bottom rails, sized to sit inside the routed post pockets.
• Panel length: 63" boards stacked between the rails, with the U-channels closing the ends.
• Material: 100% virgin PVC, uncoated, so colour runs through the profile rather than sitting on the surface.

Eight Wide or Sixteen Narrow T&G Boards

Both panel options fill the same 63" opening and deliver the same solid privacy face. The choice is a visual and handling decision rather than a performance one.

• 7/8" × 11.3" × 63", 8 pieces: fewer, wider boards with a calmer face and fewer visible joints — the usual choice for estate and villa boundaries.
• 7/8" × 6" × 63", 16 pieces: a finer, more traditional board rhythm that reads well against picket and lattice styles on the same property.
• Mixed colour builds: posts, rails and caps can be specified in a different colour from the panels to create a two-tone elevation.

Post Routing and Layout Configuration

Posts arrive pre-routed, so the layout is fixed at the drawing stage. We route each post to its position in the run rather than shipping a universal post that has to be drilled on site.

• Line post: straight run, rails through both faces.
• End post: terminates a run, rails on one face only.
• Corner post: turns the run through 90°.
• 3-way post: a T-junction where a side run meets a main run.
• Blank post: unrouted, used at gate posts, terminations and future connection points.

Material, Colour and Climate Performance

The compound is built on virgin PVC resin with UV inhibitors, impact modifiers and stabilisers, plus titanium dioxide for non-chalking protection and traceable US or German pigments. No recycled material and no lead are used in the formulation.

• Colours: White, Tan, Grey and Cream as standard.
• Temperature range: rated for service from −40 °C to 70 °C, covering cold Canadian and northern US winters through hot Australian summers.
• Surface behaviour: engineered against chalking, cracking, chipping, peeling and rot over the service life.
• Wind: resistance depends on fence style, post embedment and rail configuration, so post spacing and footing depth are confirmed against the site exposure.
• Maintenance: a garden hose rinse handles normal soiling; mild abrasive cleaners remove stubborn marks.

Installation Sequence and Site Interfaces

HEA sections install in the same order as a wood fence, but without cutting or drilling at the fence line. The sequence below is the one we support in our installation video guidance.

1. Set and brace the posts at the marked centres, cementing them where local practice cements wood posts.
2. Slide the bottom rail into the routed post pockets, aluminium insert in place.
3. Stack the T&G panels into the bottom rail and close each end with a U-channel.
4. Seat the top rail over the panel tops and into the post pockets.
5. Fix rails to posts with the supplied fasteners, then fit post caps.
6. Hang matching gates on blank or gate posts and check swing and latch alignment.

Quality Control and Acceptance Evidence

Production runs through extrusion, cutting, hole drilling, notching, packing and storage under one roof, which keeps the profile geometry consistent from the first section to the last. An independent quality-control group inspects each extruder's output hourly and audits finished goods at random.

• Quality system and product certification: ISO 9001, ASTM, SGS and TUV Global Manufacturer Certificate.
• Material compliance documentation: CE, ROHS and UL94.
• Warranty: 30-year limited warranty on the vinyl fence system.
• Traceability: raw-material batches for resin, TiO₂ and pigments are recorded and traceable.
• Acceptance support: profile dimensions, routing patterns and packing lists are issued with the order for incoming inspection.

Gates, Caps and Matching Components

A privacy run is only as good as the parts that interrupt it. We supply gates in the same profile family so the opening matches the panel face, and we hold the cap and rail profiles needed to keep a long boundary visually consistent. Where a project needs a different top treatment on part of the boundary, the HEB pvc lattice top privacy fence and the HEC pvc picket top panel fence share the same post and rail logic, so transitions between styles stay clean. For pool surrounds and mixed boundaries, the HBA pvc vertical railing fence uses the same installation method and colour range.

Information We Use to Configure Your Solution

We prepare a section, post and gate schedule from the project data below, then issue a quotation against that schedule. OEM and ODM requests, including custom widths, heights and colours, are handled through the same route.

Frequently Asked Questions

What is included in one HEA 6'x8' section?

One section comprises the top and bottom rails, two U-channels, the T&G panel set and the fasteners. Posts, post caps and gates are ordered separately so the routing and cap style match the layout.

Can the 72" height or 96" width be changed?

Yes. 72" × 96" is our standard, and we produce other heights and widths to suit the site. Non-standard sizes change the rail and panel lengths, so we confirm them before releasing the extrusion schedule.

Which post routing do I need for my layout?

Routing follows the position of each post in the run: line, end, corner, 3-way or blank. Send the run drawing and we will return a post schedule with the routing marked for every position.

Is the bottom rail strong enough for commercial installations?

The 2"×6" bottom rail carries an internal aluminum insert, which is what gives the HEA section its commercial-grade stiffness. Combined with a 5"×5" post and correct footing depth, it suits boundary work beyond single residential lots.

What colours and cap styles are available?

White, Tan, Grey and Cream are standard, and posts, rails and caps can be specified in a contrasting colour. Cap options are the New England Cap, Flat Cap and Gothic Cap.

How is the fence packed, and what warranty applies?

Sections are packed for container transport at 0.166 CBM each, with components bundled by section for straightforward site distribution. The vinyl fence system carries a 30-year limited warranty, and installation video guidance is provided with the order.